Bulk
Return
Email
DTT™ ZMAX® Galvanized Deck Tension Tie for 2x with 2-1/2 in. SDS ScrewsItem is usually in stock, but we'll be in touch if there's a problem
by Simpson Strong-Tie
DTT™ ZMAX® Galvanized Deck Tension Tie for 2x with 2-1/2 in. SDS ScrewsItem is usually in stock, but we'll be in touch if there's a problem
by Simpson Strong-Tie
Call for Price
Quantity:
Add To Cart
Add To Estimate
Add To Wishlist
Compare Item
DTT™ ZMAX® Galvanized Deck Tension Tie for 2x with 2-1/2 in. SDS ScrewsItem is usually in stock, but we'll be in touch if there's a problem
by Simpson Strong-Tie
Price:
Call for Price
Part Number: 700565F
UPC: 00707392175100
Vendor Item Number: DTT2Z-SDS2.5
Call for Price
Quantity:
Add To Cart
Add To Estimate
Add To Wishlist
Compare Item
Technical Details
Industrial Category:
Fasteners
Industrial Subcategory:
Building Materials
Industrial Subtype:
Braces and Reinforcement Hardware
Ties
Brand Name:
Simpson Strong-Tie®
Cartridge Type:
56 oz.
Chemical Resistance:
Side-by-Side
Compatible Simpson StrongTie Tools:
EDTA56P dispensing tool / EMN22i mixing nozzle
Country of Origin:
US
ExtraPackaging Type:
Cartridge
GTIN:
00707392175100
Install With:
Install using the EDTA56P dispensing tool and EMN22i mixing nozzle
Item Quantity:
1
Limited Warranty:
Limited warranty, available at www.strongtie.com/limited-warranties.
MFG Name:
Simpson Strong-Tie®
Mixing Ratio:
Uncured material – Wipe up with cotton cloths. If desired, scrub area with abrasive, waterbased cleaner and flush with water. If approved, solvents such as ketones, lacquer thinner or adhesive remover can be used. DO NOT USE SOLVENTS
Packaging Quantity:
1
Product Class:
Tie
Product Weight:
0.75
Quantity:
1
Shipping Weight:
0.75
Specification Compliance:
24 months from date of manufacture in unopened side-by-side cartridge
Surface Preparation:
For best results, store between 45°F–90°F. To store partially used cartridges, leave hardened nozzle in place. To re-use, attach new nozzle.
Unit Of Measure:
EA
UPC Code:
707392175100
UPC Number:
707392186403
Viscosity:
Base material temperature must be 50°F or above at the time of installation. For best results, material should be between 70°F and 80°F at time of application.
Manufactured By:
Simpson Strong-Tie
+
Additional Information
- 1:1 two-component, high-solids, epoxy-based anchoring adhesive formula
- 56 oz. side-by-side cartridge
- Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-2508
- Code listed under the IBC/IRC for masonry per IAPMO UES ER-265
- Cure times: 24 hours at 70°F, 72 hours at 50°F
- Easy hole-cleaning — no power-brushing required
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
- Suitable for use in dry or water-saturated concrete
- Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
Product Overview
The DTT2Z is a safe, cost-effective way to attach deck-railing posts to the deck framing for stronger, safer railings. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations. The DTT2Z is also ideal for guardrail-post connections and lateral-load connections between the deck and house.